# How many lumens do I need? > Estimate a total light-output budget from room area and your chosen illuminance target. Include utilization and maintenance assumptions without confusing fixture lumens with light reaching the room’s working plane. ## Calculator - [Open the calculator](https://measurewren.com/): A 20 m² room at 150 lux requires 3,000 lm at the target plane; at 0.70 utilization and 0.90 maintenance, the installed budget is about 4,762 lm. ## Guide - [How to work out how many lumens a room needs](https://measurewren.com/guide/): step-by-step measuring, common mistakes, formula, limits and a worked example. ## Method Area multiplied by lux gives lumens reaching the target plane. Divide that by utilization multiplied by maintenance fraction for an estimated installed lumen budget. In US units, one foot-candle is one lumen per square foot. ## Limits The example illuminance is not a recommendation for every room. Task lighting, surface reflectance, daylight, beam distribution, glare and measurement-plane height all affect a real design. This estimates a lumen budget and does not certify a compliant lighting design. ## Supporting pages - [Method and assumptions](https://measurewren.com/method/) - [About, editorial responsibility and privacy](https://measurewren.com/about/) ## Sources - [NIST: SI units and measurement](https://www.nist.gov/pml/owm/metric-si/si-units) ## Step by step 1. Measure the room length and width to find the floor area. 2. Choose a target light level in lux (or foot-candles) for the activity in the room. 3. Set a utilization fraction for light lost to walls and fittings, and a maintenance fraction for dirt and lamp ageing. 4. Total lumens = area × target lux ÷ (utilization × maintenance). Split the total across the fittings you plan to use. ## Common mistakes - Confusing lumens, the light a lamp gives out, with lux, the light that lands on a surface. - Judging brightness by watts. - Planning only overall brightness. Worktops, desks and reading spots may need extra local light. ## Worked examples ### Example 1 A 20 m² room at 150 lux requires 3,000 lm at the target plane; at 0.70 utilization and 0.90 maintenance, the installed budget is about 4,762 lm. ### Example 2 A 16 m² room at 100 lux with both fractions set to one gives 1,600 lm.